GATES AND ACCESS POINTS

click on thumbnail above to see full-size image

Slip Rails

This is the simplest form of course access. They are intended to be used where quick and easy entry to the racecourse is required. This form of opening can only be installed in a straight line. The opening is created by having a rail of smaller diameter than the main rail sliding inside the main rail. In the closed position the slip rail is locked into place with a pin. To open, the pin is removed, and the slip rail is pulled back inside the outer rail.

The sliding rail in this system can be of a different colour to the racerail so that in the event of an accident the emergency services can easily identify the nearest access point to the incident. We recommend bright yellow as the alternative to white.

click on a thumbnail above to see full-size image

Double Leaf Gate

These are high quality metal gates hot dip galvanised to British Standard 729 and powder coated to colour requirement. They incorporate a very strong expanded metal mesh and are supported by square section steel posts 100 x 100 x 3mm. They are topped with our standard rail for safety.

---

Single Leaf Gate

These are high quality metal gates hot dip galvanised to British standard 729 and powder coated to colour requirement. They incorporate a very strong expanded metal mesh and are supported by square section steel posts 100 x 100 x 3mm wall thickness. They are topped with our standard rail for safety.

Colours:	All gates are colour matched to the adjacent fence.
Finish:	Hot dip galvanised (BS729) and powder coated to colour.

---

Boom Gate

This is a very simple gate incorporating a top rail supported on a corner mesh section. The locking system for this gate is designed to lock into the running rail thus providing a continuous rail line when closed.

Technical drawings for all products are available on request. To receive a copy of any drawing please write to or E-mail us stating the drawing you require